fbpx
  • MTB
  • /
  • /
  • Micro hotel room

PREMIUM modular building systems

MICRO HOTEL ROOM

In our offer you will also find a module with hotel rooms corresponding to the five-star classification.
The valuation of such buildings is always multi-variant and takes a little more time. The main parameters of buildings are always the number of storeys and the above-mentioned standard. Starting with simple hotel rooms – staff rooms

What exactly are you buying?

MTB MICRO HOTEL ROOM. Construction based on a solid steel frame, which in combination with Scandinavian structural wood C24 and our patented technology enters a new direction of construction.
Play Video
A detailed inventory of the module’s contents:
– window (triple glazed)
– entry door
– electrical installation: LED lighting, TV, bedside reading lamp
– plumbing: shower cubicle, suspended toilet with free-standing board, washbasin with mixer tap, cabinet under washbasin, LED mirror
– kitchenette with induction hob and sink with mixer tap
– sleeping area equipped with a double bed with a premium mattress
– dining area with a table and two chairs

General information

  • The house inside is finished and ready to use
  • Elements such as foundation slab and electrical and hydraulic installations are not included in the order. They belong to additional options.

Description

MTB MICRO HOTEL is a model with a total surface area of 15 m²

Its extraordinary functionality offers a high standard of a hotel room.

  • The height of the room is 2.2 m. It allows for comfortable use, is ideal and not overwhelming.
    Total width and length is 2,2 m/5,8 m.

  • Thanks to a well-thought-out arrangement of this area we get a place for a comfortable bathroom, a bedroom part with a small, but functional kitchenette.

  • The model is equipped with a high quality entrance door. They ensure comfortable use. They are heavy and quiet. 

  • Heating of the room is done by air conditioning with heating function of 2,5 kW.

  • The heart of the house is a spacious living room, eventually with a kitchenette and a vestibule separated by a wall.

  • The model is equipped with an entrance door, anti-burglar, ergonomic 90 cm wide. They ensure comfortable use. Made of high class material. They are heavy and quiet.

  • Walls covered with windproof membrane. Construction beam 10 cm, Scandinavian wood C24. 

  • The elevation of the module can be chosen by the investor – seam sheet or plaster.

  • Each unit is subjected to an electrical system check during production and a comprehensive as-built inspection.

Our factory time spent on the prefabrication process significantly reduces the amount of work that must be done during the conventional home building method by over 70% and significantly reduces the cost of building a home, by up to 65%.

At the moment the order execution time is about 12 weeks from the date of signing the contract. We start the execution of the order with a deposit of 40% of the order value. The payment of the rest of 60% of the order value takes place within three days before the transport leaves our warehouse or before personal collection.

Transport

1

  • You don’t have to worry about transportation. We will take care of the delivery of your order from our factory to any location in the world you specify.

  • If you purchase more models, we calculate the required cargo space individually, taking into account one or more delivery addresses.

  • We take care of the customs process and do not charge any fees for it.

  • Documentation matters before and during transport are organized with the help and involvement of our logistics department.

  • No matter if it is sea or road transport, our logistics department will take care of all procedures.

  • The transport cost is calculated individually for each order.

  • All material certificates, from the transport pallets to the smallest kit detail, are included in the order file.

     

2

  • Unloading of goods

  • The project must be in a location with the ability to drive a truck in and set up a crane.

3

  • The module is assembled using a crane.

How to place an order

1

  • Search for your local distributor in our “Meet Us” section https://mtbmodules.com/about/meet-us/
  • Contact him directly and he will be sure to guide you through the entire order process, right up to the delivery of your goods. He will also help you with the installation arrangements and all the paperwork.

2

Building a house has never been so easy.

READY MADE are models manufactured in our factory according to a predefined design. Depending on the project in our offer, the buildings can be partially or fully equipped.

KIT HOUSE from MTB Modules is a revolution in the construction market. We are a global supplier of houses that are assembled using assembly instructions. It is also a revolution in terms of cost and construction time. Do you know any other technology that will allow you to build a real and durable home in less than a week?
If you are interested in READY MADE houses, find them in our offer.

Structurally, MTB Modules buildings are equivalent to conventional buildings. Their life span and warranties are also similar. However, the overall quality of modular buildings is much higher due to the controlled manufacturing process.

The offer is just for you. We deliver our houses to private individuals, but also to significant developers who are fed up with traditional construction technology, which causes many problems and uncertainties.

The advantages of modular manufacturing are many, but a long-term partnership provides the opportunity to invest and jointly optimize the product in order to add value whilst lowering costs.

The modules can be placed on a sleeper wall system, a concrete podium, steel podium, or a ground floor slab.
For some of our KIT HOUSE house models, we offer prefabricated floor panels, which the investor installs on concrete piles prepared before installation. All dimensions and spacing of concrete piles are sent at the investor’s request.

100% of the construction is completed inside a factory, which mitigates the risk of weather delays, allowing projects to be completed in half the time of traditional construction.

Yes. We make individual projects, but only for mass production.

Yes it’s true. SIP technology was created in the US and Japan with thought. Time has shown that houses built in this technology were the only ones to survive in a Category 5 hurricane.

Yes. SIP houses are fully mortgageable.

All elements of the set have the necessary certificates, even the smallest screws. We only use materials from the best and well-known producers.

The first houses built in this technology are over 100 years old. Over the years, the technology and quality of building materials have improved several times, which results in even better durability of these structures.

No Harmful Chemicals

The components used to make SIPs (foam, oriented strand board, and adhesive) meet some of the most stringent standards for indoor air quality. EPS foam uses pentane, a non-CFC blowing agent that dissipates shortly after projection. The foam cores have no off-gassing.

SIP walls can bear considerable vertical and horizontal loads with reduced internal studding. The load carried by the SIP is transferred to ground by the OSB skins, held in position by the fully bonded insulation core.

The sound resistance of a SIP wall depends on the thickness of the gypsum drywall applied, the exterior finish applied, and the thickness of the insulating foam core that is used. SIPs are especially effective at blocking high frequency noise, and most homeowners notice the quiet comfort of a SIP home.

FAQ

READY MADE are models manufactured in our factory according to a predefined design. Depending on the project in our offer, the buildings can be partially or fully equipped.

KIT HOUSE from MTB Modules is a revolution in the construction market. We are a global supplier of houses that are assembled using assembly instructions. It is also a revolution in terms of cost and construction time. Do you know any other technology that will allow you to build a real and durable home in less than a week?
If you are interested in READY MADE houses, find them in our offer.

Structurally, MTB Modules buildings are equivalent to conventional buildings. Their life span and warranties are also similar. However, the overall quality of modular buildings is much higher due to the controlled manufacturing process.

The offer is just for you. We deliver our houses to private individuals, but also to significant developers who are fed up with traditional construction technology, which causes many problems and uncertainties.

The advantages of modular manufacturing are many, but a long-term partnership provides the opportunity to invest and jointly optimize the product in order to add value whilst lowering costs.

The modules can be placed on a sleeper wall system, a concrete podium, steel podium, or a ground floor slab.
For some of our KIT HOUSE house models, we offer prefabricated floor panels, which the investor installs on concrete piles prepared before installation. All dimensions and spacing of concrete piles are sent at the investor’s request.

100% of the construction is completed inside a factory, which mitigates the risk of weather delays, allowing projects to be completed in half the time of traditional construction.

Yes. We make individual projects, but only for mass production.

Yes it’s true. SIP technology was created in the US and Japan with thought. Time has shown that houses built in this technology were the only ones to survive in a Category 5 hurricane.

Yes. SIP houses are fully mortgageable.

All elements of the set have the necessary certificates, even the smallest screws. We only use materials from the best and well-known producers.

The first houses built in this technology are over 100 years old. Over the years, the technology and quality of building materials have improved several times, which results in even better durability of these structures.

No Harmful Chemicals

The components used to make SIPs (foam, oriented strand board, and adhesive) meet some of the most stringent standards for indoor air quality. EPS foam uses pentane, a non-CFC blowing agent that dissipates shortly after projection. The foam cores have no off-gassing.

SIP walls can bear considerable vertical and horizontal loads with reduced internal studding. The load carried by the SIP is transferred to ground by the OSB skins, held in position by the fully bonded insulation core.

The sound resistance of a SIP wall depends on the thickness of the gypsum drywall applied, the exterior finish applied, and the thickness of the insulating foam core that is used. SIPs are especially effective at blocking high frequency noise, and most homeowners notice the quiet comfort of a SIP home.

See other houses 

Copyright © infoBrand, 2021

Product

Information

Company

Contact

contact@mtbmodules.com

Człuchowska 66
89-600 Chojnice
POLAND

Do you want to see our showroom? Write to us in advance. Due to the interest in our showroom, we may not find time to show you around. Chcesz zobaczyć nasz Showroom? Umów się wcześniej telefonicznie, lub mailowo.
Holler Box
Scroll to Top